6 meilleures offres (lathe operator) (à pourvoir)

CNC Machinist/ Operator
ADJ Industries Inc. —London, ON
- De 21 $ à 36 $ de l’heure
- Temps plein
- Mathématiques
- Diplôme universitaire non requis
- En présentiel
Postuler rapidement
CNC Machinist / Setup / Operators / for Lathe
MTO METAL PRODUCTS LTD —Woodstock, ON
- De 22 $ à 25 $ de l’heure
- Temps plein
- Mathématiques
- En présentiel
- Compétences en communication
- Assurance Dentaire
- Assurance Vision
Postuler rapidement
il y a 1 jour
Brake Press Operator
Lintel Structure —Richmond, BC
- De 19,04 $ à 30,64 $ de l’heure
- Temps plein
- Schémas
- Mathématiques de base
- Chariot élévateur
Postuler rapidement
il y a 9 jours
CNC Machining Specialist
Amsted Automotive —London, ON
- Esprit d'analyse
- Amélioration continue
- Compétences en communication
- Assurance Dentaire
- Programme d'Aide aux Employés
Postuler rapidement
CNC Machinist / Programmer — Toronto GTA, ON
Meadow hill —Toronto, ON
- De 34 $ à 45 $ de l’heure
- Temps plein
- En présentiel
- Assurance Dentaire
- Congés payés
Postuler rapidement
il y a 7 jours
CNC Programmer/Setter/Operator
Pond-Side Machining —Proton Station, ON
- De 21,01 $ à 37,96 $ de l’heure
- Temps plein
- Anglais
- Chariot élévateur
- Outils électriques
- Heures d'arrivée et de départ flexibles
Postuler rapidement
il y a 13 jours

More jobs to discover

Find similar jobs that you might be interested in.

CNC Operator
CIMtech Green Energy Mfg Inc. —Surrey, BC
Candidates must possess a *valid Canadian work permit, Permanent Residency, or Canadian citizenship*. Interpret blueprints, drawings, and engineering data to…
De 30 $ à 40 $ de l’heure
Postuler rapidement
CNC Programmer/Machinist
Fostet Manufacturing Inc. —Guelph, ON
Set up and operate CNC mills to produce precision parts according to blueprints, engineering drawings, and specifications. Paid uniform and work boot program.
De 80 000 $ à 90 000 $ par an
Postuler rapidement
il y a 2 jours

Show more similar jobs

Explore jobs in cities nearby

Check out jobs in cities near your current location, Columbus

CNC LATHE OPERATOR
AppleOne —Scarborough, ON
Read and interpret mechanical engineering drawings, specifications, G codes, and M codes to ensure correct program selection and part production.
De 47 840 $ à 49 920 $ par an
Postuler rapidement
CNC Machinist / Programmer — Toronto GTA, ON
Meadow hill —Toronto, ON
Read and interpret blueprints, GD&T, and engineering drawings. Red Seal 429A General Machinist certification. Paid training and certification support.
De 34 $ à 45 $ de l’heure
Postuler rapidement
il y a 7 jours

Je souhaite recevoir la dernière alerte emploi pour les postes de ce type : lathe operator

En vous connectant à votre compte, vous acceptez les conditions d'utilisation, la politique relative aux fichiers témoins et la politique de confidentialité de Workopolis.

CNC Machinist/ Operator

ADJ Industries Inc.
London, ON

Postuler rapidement

Détails du poste

Temps plein

Avantages

Stationnement sur place

Compétences

Utilisation d'un ordinateur
Pied à coulisse
Usinage
Mathématiques
Lecture de plans
Production
CNC

Description complète du poste

Position Overview:

The CNC Machinist reports to the Production Manager and is responsible for the operation, set-up and troubleshooting of one or more machines. CNC Machinists may also be required to alter and/or generate programs on various machines.

Responsibilities and Accountabilities:

Set-up, troubleshoot and/or operate new and existing production parts using vises, fixtures, chucks, etc. with one or more of the following machine(s): CNC Lathe, CNC Mill, Bandsaw, Sandblaster, Manual Mill, Manual Drill Press, hand grinders, and other power tools. These tasks will be done under limited supervision.
Alter/generate existing programs on four axis CNC machines by hand.
Performs new set-ups on a variety of CNC equipment using an advanced level of tooling.
Ensures that all set-ups are properly proven on CNC equipment for Level I and II Operators to run.
Makes changes to existing programs to reflect engineering changes, casting variations, and efficiencies.
Capable to transfer CNC programs between CNC equipment.
Capable of building complex tooling and fixturing as necessary to support machining requirements.
May perform detailed machine adjustments, if necessary.
May read and interpret technical drawings to verify machines parts, and to determine machine set-up and production methods.
May visually or mechanically inspect parts for defects (cracks, chips, dimension, surface finish, etc) as part of in-process inspection.
Records results of defects and notifies lead/supervisor of deviation as appropriate.
May use one or more of the following for measuring and inspection: tape measure, various types of micrometers and calipers, profilometer, height gauge, indicators, edge finders, thread gauges, pin gauges, and bore gauges with master ring.
Understands and meets or exceeds production and quality standards; seeks to minimize reject rate.
Follows approved drawings and a work instruction provided, and improves process and work instructions for new and existing parts.
Required to perform machine preventative maintenance functions, i.e. checking coolants, checking lubricants, and changing filters, etc.
Keeps machines and work area clean; notifies supervisor or maintenance when machine abnormalities occur
Safely move components with lifting devices such as overhead cranes, jib cranes, and fork-lifts.
Possess the ability to use the computer system for basic departmental transactions.
Train other employees as required.
Can be the recognized expert and may be sought out to perform leadership duties as necessary.
Must serve as a resource to others in the resolution of complex technical problems.

Administration

Maintains an acceptable level of performance by following established policies and procedures, and participating in continuous improvement efforts by supporting and implementing new ideas.
Sets a positive example by maintaining a respective attitude, cooperating with co-workers, management, and internal and external customers.
Be a productive team member and help to meet established departmental and Company goals.
Wears appropriate personal protective equipment at all times when required
Report any personal workplace injuries to direct supervisor immediately.
Report safety issues to direct supervisor or EHS Manager as soon as possible.
Responsible for knowing where non-hazardous waste collection containers are located and for putting non-hazardous/hazardous wastes in appropriate containers.
Report to work for your regularly scheduled shifts on time and ready to work.
Follow all company policies and health and safety procedures.
Effectively gives and receives feedback and willingly asks questions and seeks direction when needed.
May work any and all shifts/days as required and may be asked to work between ADJ facilities.
Willingly accepts responsibility of sharing skills and knowledge with other employees.
Perform all other duties as may be assigned from time to time.

Qualifications:

Must meet the requirements of the Canadian Controlled Goods Security Assessment Application as per Section 15 of the Controlled Goods Regulations, SOR/2001-32.
Educational background in manufacturing or equivalent experience working on CNC machines
1-5 years of experience working with CNC machines performing set-ups and program alterations
Must be proficient with all CNC control systems within area of responsibility.
Must be proficient in Geometric Dimensioning and Tolerancing (GD&T).
Must have full understanding of G and M codes in order to perform set-up functions
Skilled knowledge of blue print reading.
Skilled machining experience, material knowledge, and math skills.
Must meet all training requirements as defined by department.

*This position is an existing vacancy*

Successful applicants must meet all requirements under the Canada Controlled Goods Regulations (CGR) and must be approved as mandated by Public Works & Government Services Canada and applicable contractual obligations.

Use of Artificial Intelligence:

This recruitment process does not utilize artificial intelligence or automated decision-making systems to screen, assess or select candidates.

Accommodations are available at all stages of the recruitment process. Applicants requiring accommodation should advise us in advance. While we appreciate all applications, only candidates selected for an interview will be contacted.

Job Type: Full-time

Pay: $21.00-$36.00 per hour

Benefits:

On-site parking

Ability to commute/relocate:

London, ON N5V 3N6: reliably commute or plan to relocate before starting work (required)

Experience:

CNC: 1 year (required)

Work Location: In person

Postuler rapidement

Affinez votre recherche

lathe operator emplois

CNC Machinist/ Operator

CNC Machinist / Setup / Operators / for Lathe

Brake Press Operator

CNC Machining Specialist

CNC Machinist / Programmer — Toronto GTA, ON

CNC Programmer/Setter/Operator

More jobs to discover

Explore jobs in cities nearby

Je souhaite recevoir la dernière alerte emploi pour les postes de ce type : lathe operator

Related Searches

Outils pour les chercheurs d'emploi

Outils Employeurs

Parcourir

Garder le contact